Installing tubeless valve stems
Bike Care

Tubeless Install 101 (TT.6)

2 min read

Words: Andrew Major | Originally published on Meat Engines

There was a time, years ago, when teaching other riders how to change a flat tire, swap brakes pads, or a shifter cable, was part of my job working at shops. In the winter or early season, we'd offer basic maintenance classes as a way to remind folks we were there. A far cry from what BikeRoom Jeff brought to North Vancouver, before moving to Kaslo, and what Nice Guy Geoff is doing now but it's certainly something I remember enjoying.

In more recent years my only real experience 'teaching' has been working on bikes with my daughter. I think it's fair to say she knows a thing or three. And one of those things is how to set up a pair of tubeless tires. Tape the rims, install the valves, mount the tire, add the sealant, remove the cores, and pump.

It sounds straightforward. It is straightforward. Most of the time, if you've done it a few times. But, like a lot of stuff when it comes to working on bikes some folks need a pushing-off point to get them started. Hence the raison d'être behind Tunnel Talk number six.

Installing anodized blue tubeless valve stems

The Clairebarian installing the anodized blue valve stems she requested for her birthday.

What's better than learning to work on your bike with some random asshat you don't know? How about learning to work on your bike with this asshat that you do?

In addition to my playing bike mechanic part-time at Essential, I'm also guesting for a few evenings of instruction, teaching the same technique The Clairebarian uses - AKA the only way I know how. You're booking time, not a specific lesson plan, so if we're ahead of schedule we'll add in some other maintenance that's best done when the wheels are off.

Want to learn it hands-on? Check out our Tubeless Setup class and the rest of our bike maintenance classes.


For more Tunnel Talk check out:

TT.0 Welcome To Tunnel Talk

TT.1 #1FG Oval Obsession

TT.2 Mountain Biking Happens

TT.3 International Standard Brake Mounting IS Better

TT.4 Tool Free Admonishment

TT.5 "Is That Andrew Major's Bike?"

Questions riders ask

How do you set up mountain bike tires tubeless?

Tape the rims, install tubeless valves, mount the tire, add sealant, remove the valve cores to seat the bead, then reinstall the cores and pump to pressure.

Can I learn tubeless setup in North Vancouver?

Yes. Essential Cycles runs a hands-on Tubeless Setup class at the shop.

Bike need some love?

Our North Vancouver workshop services all kinds of bikes, usually with a 24–48 hour turnaround. Rather do it yourself? Learn in a maintenance class.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.