Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Brakes/Levers/Pads

$124.99
Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel
$144.99
The Spyre SLC is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 146g per caliper - Carbon actuation arm for maximum rigidity, and weight savings - Dual-piston actuation - Works with ALL cable actuated road levers. Compressionless (linear strand) housing is highly recommended - TRP ultra-grippy semi-metallic pads. These are compatible with Shimano M525/M515 pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only
$49.99
The SwissStop Disc RS brake pad set offers a highly balanced combination of brake performance, durability and incredibly low noise in all conditions. - Delivers a smooth feel in the brake lever with predictable and progressive brake power - Provides extremely quiet operation in all environments - Features an organic compound that offers smooth modulation and is rotor-friendly - At 1.6mm thick the steel backplate saves weight over standard designs, yet provides the preferred thermal characteristics, strength and stability of steel - Compatible with Shimano XTR BR-M9120, XT BR-M8120,BR-M8020, SLX BR-M7120, Deore BR-M6120,BR-MT420, Saint BR-M820,BR-M810, Zee BR-M640, BR-MT520; TRP Quadiem, Quadiem SL, Slate T4; Tektro HD-M750, HD-M745, HD-M735, HD-E725 - Pad Shape Number: 19 - Designed for ebike: Yes - Backing Plate Material: Steel - Compound: Organic
$32.49 - $44.99
Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.
$72.99 - $75.99
Shimano Altus hydraulic disc brake and lever sets feature an entry-level design that's ideal for beginner riders and riders with smaller hands. - The brake lever's versatile design matches numerous bike styles - Braking power is adjusted for entry-level riders - Pre-bled brakes for easy, quick, and clean installation
$119.99 - $129.99
Shimano BR-RS305 Mechanical Road Disc Brake Caliper - Cable actuated - Single Flat-mount caliper - For use with Drop-Bar or Flat-Bar road levers - L02A Resin Pads - Rotor not included - IceTech pad compatible caliper - Includes fixing bolts for 25mm thick mount - Brake Caliper Type: Flat Mount - Brake Lever Actuation: Short Pull Super SLR - Rotor Included: No - Pad Compound: Resin
$42.99 - $48.99
- Pair of D-Type disc brake pads without fins, for 1 caliper - Available with Resin or Metallic brake compound - Fits most 4-piston Shimano brakes, including XTR BR-M9120, XT BR-M8120, XT-BR-M8020, SLX BR-M7120, Saint BR-M820 and BR-M810, Zee BR-M640 and non-series BR-MT520 and BR-MT420 calipers - Can be used as a lower cost alternative to H-Type or N-Type pads - Includes spring and pin
$42.99
Shimano D02S Metal Disc Brake Pads keep you under control in any conditions. - Fits Saint BR-M820/810 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability
$174.99 - $179.00
BL-M6100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-M6100 - Pre-assembled - One-way bleeding system - Superior modulation gives you the power you need at low weight - Quick piston retraction - Lightweight 2-piston disc brake caliper - ICE TECHNOLOGIES - Without rotor and adapter
$57.99 - $78.99
Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring
$69.99
Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.
$79.99
Shimano Deore XT SM-RT86 6-Bolt rotors feature a 3-layer construction with an aluminum core and two stainless steel outer layers. Reducing rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors, the result is better braking performance and reduced brake fade. - Aluminum spider - Includes rotor fixing bolts and locking washers
$44.99
Shimano G04Ti Metal Disc Brake Pads deliver superlight, long-lasting braking power. - Fits XTR BR-M9000, BR-M9020, BR-M985, XT BR-M8000, BR-M785, SLX BR-M666, Alfine BR-S700 and BR-R785, BR-RS785 road disc calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Titanium backing plate for light weight and improved heat insulation
$71.99
Shimano H03C Metal Disc Brake Pads keep you in control in any conditions with cooling fins for those endless, grin-inducing descents.. - Fits Saint BR-M820 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Aluminum radiator cooling fins increase pad life and reduce brake fade
$17.99 - $42.99
- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)
$41.99 - $52.99
- Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100
$56.99 - $69.99
- Pair of N-type disc brake pads with fins, for 1 caliper - Fits 4-piston SLX, XT and XTR calipers from 12-speed generation groups - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical downhill stretches - Longer lasting than D-type pads - Spring included Model Compatibility: Shimano BR-M9120, BR-M8120, BR-M8020, BR-M7120, BR-M820, BR-M810, BR-M640, BR-MT520
$18.99
- Shimano, BR-7900 R55C3 Replacement cartridge pads, pair - Also fits BR-6700 and BR-5700
$18.99 - $33.99
Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s
$67.99
SLX SM-RT70 Center Lock rotors deliver powerful and consistent braking performance in all riding conditions. They feature a 3-layer structure (an aluminum core paired with two stainless steel outer layers) that reduces rotor surface temperatures approximately 100 degrees Celsius compared to all-steel rotors. - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm hubs (sold separately)
$17.99
Shimano, SM-MA-F203P/P, Disc brake adapter for Post Mount caliper, Front, Post Mount fork, 203mm rotor
$45.99 - $64.00
6-Bolt disc brake rotor - Easy to install anti-loosen plates help secure disc brake rotor bolts in place - Resin/Metal pad compatible - Size: 160, 180, 203, 220mm
$59.99 - $89.99
- SLX / 105 level Center-Lock rotors - Ice-Tech construction uses stainless steel brake surfaces with an aluminum core - The higher heat dissipation of the aluminum helps to reduce the surface temperature - High stopping power and practically no signs of fading - Features an external serration lockring (BB-type tool), compatible with all axle types
$94.99
Shimano XT RT86 6-Bolt Disc Rotor - 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes rotor fixing bolts and non-turn washers - Hub/Disc Compatibility: 6-Bolt Disc - Weight: 173 g - Rotor Size (mm): 203 mm - Rotor Type: Two Piece - Pad Compatibility: All Pad Compounds
$66.00 - $82.00
Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.
$243.00
Sleek, easy to use, yet immensely powerful. Code R packs a winning punch with a reliable DirectLink lever mated to Code’s new oversized four-piston caliper. SRAM’s signature ergonomics are supplemented by the tool-free reach adjust for a fit to each riders’ needs, to unleash Code’s superior braking power, consistency, and modulation. - Four aluminum pistons provide the stopping power and excellent heat management - Stainless steel heat shield breaks the thermal connection between the brakes pads and the caliper body, which reduces fluid temperature - Forged aluminum lever body and blade - Bleeding Edge design for easier maintenance - Includes steel-backed sintered metal pads
$75.00 - $93.00
- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management
$40.00
Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37
$38.00 - $47.00
SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.
$61.00
- For long tours these pads offer safety together with excellent performance in all situations. - For MT disc brake 2 piston - 2 single brake pads, 2 pad retaining bolts
Page 1 of 14 Next page