You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Adapts Presta valve stems for use with standard Schrader pumps.
- Digital pressure gauge - Fits both Schrader and Presta valves - Digital screen
Replacement digital gauge that is compatible with the Air X-Plorer Digi 10.0, Airmotion 12.0, and the Airkompressor Compact 10.0. - 63mm diameter - Accurate readings (hundredths) - PSI or Bar mode - Bright orange text for good visibility
Replacement analog gauge that is compatible with the Airkompressor Compact 10.0. - 63mm diameter - 144 PSI Max - Works with Airkompressor 10.0 Floor Pump - Gauge reads PSI on the outside, and Bar on the inside
Replacement analog gauge that is compatible with the Air X-Plorer 10.0. - 80mm diameter - 144 PSI Max - Works with the Air X-Plorer 10.0 - PSI and Bar readings on the gauge
- The non-digital version of Air X-Plorer 10.0 Digi this analog version delivers the same strong air flow - Updated MV Easy Head valve allows for Presta/Schrader/Dunlop valves and also is consumer serviceable
- Top of the line solution when it comes to inflating bikes - Features updated MV Easy Head and sturdy steel construction - Digital gauge makes accurate inflations a breeze and is accurate to hundredths - Updated MV Easy Head valve allows for Presta/Scrader
Now 50mm higher than before, the Air X-Press 8.0 is an upgrade of our sturdy and lightweight plastic floor pump with an accurate gauge for precise pressure control. - Displays both bar and PSI - Convenient handling due to proven SKS MULTI VALVE pump head with thumb lock lever - Inflates easily up to 8 bar/115 PSI
Don't let this diminutive pump fool you: SKS' Airboy has big lungs and it's ready to fill your tires quickly. Light and tough, this high-pressure pump fits in your jersey pocket easily and fills your tires up to 115 psi. The unique 2-chamber/2-plunger pumping system provides high pumping efficiency so you get back to your ride quicker. And, at only 62 grams, you'll forget you have this little bad boy when you're not using it.
It's tough to go wrong with the original, and SKS' Airboy XL takes everything you love about Airboy and makes it high-volume specific. The 2-chamber/2-plunger pumping system provides plenty of efficiency, especially considering its tiny size! This high volume pump gets your larger tires up to 75 psi, regardless of whether you're running Presta or Schrader valves. The Airboy XL tackles whatever you're running with surprising toughness and quickness.
- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible
Airflex Explorer Mini Pump is a small pump with great impact. The hose, stored in the pump tube, screws onto the valve head. Flexible hose prevents damage to valve stem during inflation. Pump handle is soft, easy-to-grip compound. Great pump for MTB or urban bikes. Small enough to fit in jersey pocket, but also includes a frame mount. - Inflates to 5 bar/73 psi - Compatible with Presta, Schrader, and Dunlop Valves - Includes a holder which attaches at cage mount - Length: 205mm - Weight: 132 grams - Made in Germany
Airflex Racer Mini Pump is a small pump with great impact. The hose, stored in the pump tube, screws onto the Presta valve head. Flexible hose prevents damage to valve stem during inflation. Pump handle is soft, easy-to-grip compound. Great pump for high-pressure tires. Small enough to fit in jersey pocket, but also includes a frame mount. - Inflates to 8 bar/115 psi - Compatible with Presta and Dunlop Valves - Includes a holder which attaches at cage mount - Length: 196mm - Weight: 105 grams - Made in Germany
- Great entry level pump in a compact form - Features a steel air chamber plastic base and rubber textured handle for easy grip - Updated MV Easy Head valve allows for Presta/Schrader/Dunlop valves and also is consumer serviceable
- The tallest pump in the SKS lineup features a top mounted gauge for easy and precise fills - Features steel construction and soft touch handle - Updated MV Easy Head valve allows for Presta/Schrader/Dunlop valves and also is consumer serviceable
Airspy Wheel Mounted Air Sensor—Schrader mounts on the wheel/valve and gives constant readout of tire pressure on either the SKS MYBIKE app or Garmin device. - For front and rear wheels - Includes battery and security lock - For Schrader valve stems - Reads to 8.3 bar / 120 psi - Weight: 18 grams
Barrel Washer for Floor Pump may need replaced after several years of pump use. For best results barrel washers should be lubricated with a silicone-based lube. Barrel washers ordered from this site will come with lubricant already applied. - 30mm Barrel Washer (11687) fits Rennkompressor and Airmotion 12.0
Barrel Washer for Floor Pump may need to be replaced after several years of pump use. For best results barrel washers should be lubricated with a silicone-based lube. Barrel washers ordered from this site will come with lubricant already applied. - 35mm Barrel Washer (10151) Fits Air X-Press 8.0, AirKompressor Compact 10.0, AirKompressor 10.0, Air X-Plorer 10.0, Air X-Plorer Digi 10.0, Airworx 10.0
Two 24g threaded CO2 cartridges with insulation sheath.
Smart-style head will retrofit to any SKS pump. - Presta/Schrader/Dunlop
Tailor your tire pressure for the ultimate riding experience with SKS' Injex Control. It features a gauge so you know exactly what pressure you're rolling, and it pumps comfortably all the way up to 144 psi. Whether you run Presta Valves or Schrader, the Injex Control is on the case with a folding T-handle and a tough aluminum barrel.
SKS's Mountain Suspension Pump is a perfect addition to your off-road pack. It features high-quality aluminum construction, a mini gauge and a pressure-release valve. And, the flexible steel mesh hose boasts a 2-stage thread connector so removing the pump doesn't release any air pressure from your suspension.
Head will retrofit all SKS pumps. - One hole for Presta/Dunlop, one for Schrader
The classic SKS Multi Valve head has been completely revamped! Now you can seamlessly lock the pump head with one finger. The new MV EASY head features improved functionality, a sleek design, and better handling. The head is made of high glass fiber-reinforced plastic. This head features separate holes for use on either Presta or Schrader valve types. Say goodbye to unwanted whistling and stuck check valves, thanks to the new Rocker technology that SKS Germany has put in the new MV EASY pump head. - Max Pressure: 230 PSI - Will work with all SKS floor pumps
Replacement Grommet set for MV Easy pump head. This kit comes as a set of 10 total pieces: - 5 pieces for the Presta valve - 5 pieces for the Schrader valve
Replacement Head/Hose for Rennkompressor. This unit also fits the SKS Airmenius pump. - Features the MV EASY Head.
Replacement MV EASY Multi-Valve head with hose. This item is compatible with the Air X-Plorer 10.0, Airmotion 12.0, and the Air X-Plorer Digi 10.0. The kit contains an MV EASY multi-valve head and a 1200mm hose.
Replacement MV EASY Multi-Valve head with hose. This item is compatible with the Airkompressor Compact 10.0. The kit contains an MV EASY multi-valve head and a 900mm hose.
Head Washer for 2371 Head
Page 1 of 6 Next page